Accessories

Valk

Valk manufactures a complete line of wear parts for all snowplow lines, including moldboard shoes, nose pieces, plow shoes, and wing shoes.

accessories

  • Valk
  • Valk
  • Valk
  • Valk
  • Valk

fasteners

If the blade doesn't fit right and stay in place, even the best cutting edge will fail. Valk has available quality fasteners which hold true and help prevent slippage which could result in cutting edge failure.

We offer a complete selection of cap screws, carriage bolts, plow bolts, track shoe bolts, hex nuts, spring lock washers and rivets.

Fasteners are available in Grade 2, 5, and 8. When severe operating conditions exist, Grade 8 is recommended.

  • Valk
  • Valk

Hitches

Valk
UN300

This universally designed hitch is adaptable to most trucks up to 1 ton capacity. Especially made for SP and VW series snowplows.

 
Valk
FH900

This model is mounted to the front bumper and also truck underframe by means of push bars. Plowing forces are transmitted through front bumper and push bars to truck frame. Light duty LD900 version also available.

 
Valk
HD900

The HD900 hitch is a front bumper to frame mounted hitch that is well suited for heavy duty use.

Valk
bh700

This model is a bumper to front axle hitch designed for plows weighing less than 1500 lbs. Pushing forces are transmitted through the bumper and frame.

 
Valk
md700

The MD700 is a variation of the BH-700 designed to slip over the front axle.

 
Valk
co210

The CO210 hitch has been designed for Tilt Cab trucks. The vertical portion of the hitch telescopes downward to permit tilting of cab.

Valk
UF600

This heavy duty structured underframe hitch transmits all stresses imposed by plow directly to truck frame close to driving wheels. No push on front axle.

 
Valk
NJ200

The NJ200 hitch is a bumper to front axle hitch with a special rear swivel adapter to allow flexing of truck axle without undue strain to hitch or truck. Hookup lugs are recessed between vertical and horizontal sections. Well suited for heavy duty as well as lighter plows.

 
Valk
QH100

This hitch is designed for quick hookup. Plow is attached without the use of pins or liftchain. Driver can hook up plow from truck cab.

Valk
BH200

The BH200 hitch is designed for heavy duty plows weighing 1500 lbs. or more. Heavy H beam is designed for the horizontal and vertical members. Wide liftarm helps prevent side chatter.

 
Valk
OH-10

The OH-10 heavy duty structural underframe hitch is constructed from 4" H beam. All stresses are transmitted directly to the truck frame close to driving wheels. No push on front axle. Lifting portion is integral part of this hitch.

Snowplow Options

  • Valk
  • Valk
  • Valk
  • Valk
  • Valk
  • Valk
  • Valk
  • Valk
  • Valk
  • Valk
  • Valk
  • Valk
  • Valk
  • Valk
  • Valk
  • Valk