Valk One Way snowplows are designed for high speed snow removal. A smooth rolled, tapered moldboard permits fast, efficient snow removal with a minimum of truck effort. They are ideal for highways, shopping centers, or large open areas.

• A fully enclosed dual trip spring assembly permits the moldboard to trip forward when the plow strikes an obstruction and automatically returns the moldboard to the normal plowing position. This prevents damage to the plow and truck and also safeguards the operator.
• Adjustable caster assemblies equipped with wear shoes stabilize the plow, prevent chatter, and reduce cutting edge wear. Carbide wear shoes and wheels are also available.
• The plow can be adjusted for different cutting widths and plowing angles. The moldboard pitch is also adjustable.
• The plow comes equipped with an abrasive resistant cutting edge and wear shoes. Carbide blades, caster, and moldboard shoes are also available for increased abrasive wear resistance.
• 3/8 U.H.M.W. polyethylene moldboard available.
• 116" semicircle with 5 hookup points available on models 10 feet and above.

• V400 Series snowplows are designed for heavy duty, high speed plowing at a fixed plowing angle.
• The moldboard has eight vertical ribs with two at each hookup point.
• The pushframe has two adjustable trip springs to allow the plow to pass over obstructions.
• A moldboard pitch adjusting bar also has a shear pin to prevent damage to the plow and truck.
• The swivel bar allows the plow to follow road contours.
• Two replaceable skid type shoes support the plow and prevent the moldboard from digging into the road.

• V600 Series snowplows are designed for heavy duty plowing or extreme plowing conditions. Recommended for trucks of 5 to 10 ton capacity.