Reversible Snowplows
Valk Reversible snowplows are designed for rugged all purpose plowing. The plow can be adjusted for discharging snow from the right or left end of the moldboard. Ideal for city streets, parking lots, or any place where low cost snow removal is required.
• A fully enclosed dual trip spring assembly permits the moldboard to trip forward when the plow strikes an obstruction and automatically returns the moldboard to the normal plowing position. This prevents damage to the plow and truck and also safeguards the operator.
• Adjustable caster assemblies equipped with wear shoes stabilize the plow, prevent chatter, and reduce cutting edge wear. Optional carbide wear shoes and wheels are also available.
• The plow can be adjusted for different cutting widths and plowing angles. The moldboard pitch is also adjustable.
• The plow comes equipped with an abrasive resistant cutting edge and wear shoes. Carbide blades, caster, and moldboard shoes are also available for increased abrasive wear resistance.
• 3/8 U.H.M.W. polyethylene moldboard available.
• 116" semicircle with 5 hookup points available on models 10 feet and above.
• 104" semicircle with 5 hookup points available on 9 foot models.
• Built-in snowshield available.
• Adjustable caster assemblies equipped with wear shoes stabilize the plow, prevent chatter, and reduce cutting edge wear. Optional carbide wear shoes and wheels are also available.
• The plow can be adjusted for different cutting widths and plowing angles. The moldboard pitch is also adjustable.
• The plow comes equipped with an abrasive resistant cutting edge and wear shoes. Carbide blades, caster, and moldboard shoes are also available for increased abrasive wear resistance.
• 3/8 U.H.M.W. polyethylene moldboard available.
• 116" semicircle with 5 hookup points available on models 10 feet and above.
• 104" semicircle with 5 hookup points available on 9 foot models.
• Built-in snowshield available.
RV Series
| Cutting | Width | At | ||||||||||||
| Plow Model No. | Overall Width | Height | Hinge Point Centers | Number of Vertical Ribs | Number of Horizontal Ribs | Enclosed Trip Cylinder Springs | Thickness of Moldboard | Cutting Edge Size | Approx. of Lbs. | 0° | 28° | 35° | 42° | |
| RV801-60 | 8' | 30" | 60" | 6 | 2 | 2 | 10 GA. | 1/2" x 6" | 950 | 8' | 7'1" | 6' 61/2" | 5' | 1 to 2 Ton |
| RV901-60 | 9' | 30" | 60" | 8 | 2 | 2 | 10 GA. | 1/2" x 6" | 1070 | 9' | 7'11" | 7'5" | 6'10" | 2 to 4 Ton |
| RV101-60 | 10' | 30" | 60" | 8 | 2 | 2 | 10 GA. | 1/2" x 6" | 1120 | 10' | 8'10" | 8'2" | 7'6" | 2 to 5 Ton |
| RV101-75 | 10' | 30" | 75" | 8 | 2 | 2 | 10 GA. | 1/2" x 6" | 1160 | 10' | 8'10" | 8'2" | 7'6" | 2 to 5 Ton |
| RV102-60 | 10' | 36" | 60" | 8 | 2 | 2 | 10 GA. | 1/2" x 6" | 1330 | 10' | 8'10" | 8'2" | 7'6" | 2 to 5 Ton |
| RV102-75 | 10' | 36" | 75" | 8 | 2 | 2 | 10 GA. | 1/2" x 6" | 1370 | 10' | 8'10" | 8'2" | 7'6" | 2 to 5 Ton |
| RV103-116 | 10' | 42" | 116" | 8 | 2 | 2 | 10 GA. | 1/2" x 6" | 1510 | 10' | 8'10" | 8'2" | 7'6" | 2 to 5 Ton |
| RV111-75 | 11' | 30" | 75" | 8 | 2 | 2 | 10 GA. | 1/2" x 6" | 1210 | 11' | 9'81/2" | 9' | 8'2" | 2 to 5 Ton |
| RV112-75 | 11' | 36" | 75" | 8 | 2 | 2 | 10 GA. | 1/2" x 6" | 1460 | 11' | 9'81/2" | 9' | 8'2" | 2 to 5 Ton |
| RV113-116 | 11' | 42" | 116" | 8 | 2 | 2 | 10 GA. | 1/2" x 6" | 1605 | 11' | 9'81/2" | 9' | 8'2" | 2 to 5 Ton |
| RV121-75 | 12' | 30" | 75" | 8 | 2 | 2 | 10 GA. | 1/2" x 6" | 1260 | 12' | 10'7" | 10' | 8'11" | 3 to 5 Ton |
| RV122-75 | 12' | 36" | 75" | 8 | 2 | 2 | 10 GA. | 1/2" x 6" | 1480 | 12' | 10'7" | 10' | 8'11" | 3 to 5 Ton |
| RV123-116 | 12' | 42" | 116" | 8 | 2 | 2 | 10 GA. | 1/2" x 6" | 1650 | 12' | 10'7" | 10' | 8'11" | 3 to 5 Ton |
RV Power Reverse Series
A mechanical lock latch is featured on RV Series snowplows equipped with power angling. The reversing cylinders automatically release the latch before angling. When the desired plowing angle is reached, the latch is moved back into position mechanically to hold the desired angle and take pressure off of the hydraulic cylinders.| Cutting | Width | At | ||||||||||||
| Plow Model No. | Overall Width | Heigt | Hinge Point Centers | Number of Vertical Ribs | Number of Horizontal Ribs | Enclosed Trip Cylinder Springs | Thickness of Moldboard |
Cutting Edge Size |
Approx. of Lbs. | 0° | 28° | 35° | 42° | Recommended Truck Size |
| RV801-60PR | 8' | 30" | 60" | 6 | 2 | 2 | 10 GA. | 1/2" x 6" | 1175 | 8' | 7'1" | 6' 61/2" | 5' | 1 to 2 Ton |
| RV901-60PR | 9' | 30" | 60" | 8 | 2 | 2 | 10 GA. | 1/2" x 6" | 1295 | 9' | 7'11" | 7'5" | 6'10" | 2 to 4 Ton |
| RV101-60PR | 10' | 30" | 60" | 8 | 2 | 2 | 10 GA. | 1/2" x 6" | 1345 | 10' | 8'10" | 8'2" | 7'6" | 2 to 5 Ton |
| RV101-75PR | 10' | 30" | 75" | 8 | 2 | 2 | 10 GA. | 1/2" x 6" | 1385 | 10' | 8'10" | 8'2" | 7'6" | 2 to 5 Ton |
| RV102-60PR | 10' | 36" | 60" | 8 | 2 | 2 | 10 GA. | 1/2" x 6" | 1555 | 10' | 8'10" | 8'2" | 7'6" | 2 to 5 Ton |
| RV102-75PR | 10' | 36" | 75" | 8 | 2 | 2 | 10 GA. | 1/2" x 6" | 1595 | 10' | 8'10" | 8'2" | 7'6" | 2 to 5 Ton |
| RV103-116PR | 10' | 42" | 116" | 8 | 2 | 2 | 10 GA. | 1/2" x 6" | 1735 | 10' | 8'10" | 8'2" | 7'6" | 2 to 5 Ton |
| RV111-75PR | 11' | 30" | 75" | 8 | 2 | 2 | 10 GA. | 1/2" x 6" | 1435 | 11' | 9'81/2" | 9' | 8'2" | 2 to 5 Ton |
| RV112-75PR | 11' | 36" | 75" | 8 | 2 | 2 | 10 GA. | 1/2" x 6" | 1685 | 11' | 9'81/2" | 9' | 8'2" | 2 to 5 Ton |
| RV113-116PR | 11' | 42" | 116" | 8 | 2 | 2 | 10 GA. | 1/2" x 6" | 1830 | 11' | 9'81/2" | 9' | 8'2" | 2 to 5 Ton |
| RV121-75PR | 12' | 30" | 75" | 8 | 2 | 2 | 10 GA. | 1/2" x 6" | 1485 | 12' | 10'7" | 10' | 8'11" | 3 to 5 Ton |
| RV122-75PR | 12' | 36" | 75" | 8 | 2 | 2 | 10 GA. | 1/2" x 6" | 1705 | 12' | 10'7" | 10' | 8'11" | 3 to 5 Ton |
| RV123-116PR | 12' | 42" | 116" | 8 | 2 | 2 | 10 GA. | 1/2" x 6" | 1875 | 12' | 10'7" | 10' | 8'11" | 3 to 5 Ton |
RVS Power Reverse Series
The RVS Series snowplows are power angled by means of 4x10 double acting cylinders. Both cylinders are used for reversing in either direction without recourse to a locking device. This means more reversing power while the truck and plow are moving. Cylinders are attached by two 1 1/4" pins.• Also available with power angling by means of 4x22 double acting cylinders.
• Optional cushion valve available for cylinder protection.
| Cutting | Width | At | |||||||||||
| Plow Model No. | Height | Hinge Point Centers | Number of Vertical Ribs | Number of Horizontal Ribs | Enclosed Trip Cylinder Springs | Thickness of Moldboard | Cutting Edge Size | Approx. of Lbs. | 0° | 35° | 42° | Recommended Truck Size | |
| RVS930PR | 9' | 30" | 84" | 8 | 2 | 2 | 10 GA. | 1/2" x 6" | 1685 | 9' | 7'5" | 6'10" | 3 to 5 Ton |
| RVS936PR | 9' | 36" | 84" | 8 | 2 | 2 | 10 GA. | 1/2" x 6" | 1745 | 9' | 7'5" | 6'10" | 3 to 5 Ton |
| RVS1030PR | 10' | 30" | 84" | 8 | 2 | 2 | 10 GA. | 1/2" x 6" | 1810 | 10' | 8'2" | 7'6" | 5 to 10 Ton |
| RVS1036PR | 10' | 36" | 84" | 8 | 2 | 2 | 10 GA. | 1/2" x 6" | 1860 | 10' | 8'2" | 7'6" | 5 to 10 Ton |
| RVS1042PR | 10' | 42" | 84" | 8 | 2 | 2 | 10 GA. | 1/2" x 6" | 1925 | 10' | 8'2" | 7'6" | 5 to 10 Ton |
| RVS1130PR | 11' | 30" | 84" | 8 | 2 | 2 | 10 GA. | 1/2" x 6" | 1935 | 11' | 9' | 8'2" | 5 to 10 Ton |
| RVS1136PR | 11' | 36" | 84" | 8 | 2 | 2 | 10 GA. | 1/2" x 6" | 1995 | 11' | 9' | 8'2" | 5 to 10 Ton |
| RVS1142PR | 11' | 42" | 84" | 8 | 2 | 2 | 10 GA. | 1/2" x 6" | 2100 | 11' | 9' | 8'2" | 5 to 10 Ton |
